MtronPTI 100MHz Sinewave Electronically Vibration Compensated OCXO
May 25, 2018
In high reliability communications and radar applications, maintaining performance comes first. The communication link must stay up; the picture must be clear even when conditions are less than ideal. Radars and satellite tuners use high performance crystal oscillators to keep frequencies quiet for clear pictures and exact for good channel lock but it’s often a difficult tradeoff: size, weight and power constraints versus ultimate noise performance when looking for small slow moving targets from shaking platforms.Read More
Miniature Low Profile Dual Filter
May 16, 2018
Using over 50 years of high performance RF filter design and manufacturing experience – incorporating custom designed and tuned coils, combined with discrete design expertise, MtronPTI can provide miniature low profile dual filters for applications where space is a constraint. Dual filters not only reduce the overall mechanical footprint, but also offer moderate power handling and excellent out of band performance.
MtronPTI High Power Switched LC Filter Assembly
May 15, 2018
Using over 50 years of high performance RF filter design and manufacturing experience – incorporating custom designed and tuned coils, combined with discrete and high power design expertise, MtronPTI can provide integrated switched filter assemblies that not only reduce the overall mechanical footprint, but also offer improved electrical performance and power handling. MtronPTI High Power Switched Lumped Element Filter Assemblies are available in multiple frequency ranges.
High Power LC Diplexer Assembly
May 15, 2018
Using over 50 years of high performance RF filter design and manufacturing experience – incorporating custom designed and tuned coils, combined with discrete and high power design expertise, MtronPTI can provide high power LC Diplexers that not only reduce the overall mechanical footprint, but also offer improved electrical performance and power handling.
- High Power
- Better Isolation/RF Shielding
- Low Insertion Loss
MtronPTI Introduces Low Phase-Noise. Tight Stability TCXO
March 27, 2018
MtronPTI Introduces Low Phase-Noise, Tight Stability TCXO for GPS and Communication Markets.
Orlando, FL, March 19, 2018 – MtronPTI, leader in precision frequency control and custom RF/microwave filters, today announces the release of new M6030/M6131 series of Low Phase-Noise high stability TCXOs. M6030/6031 has optimal balance between close-in phase noise and the noise floor, making it suited to be optimal reference clock for GPS network and communication applications. This family of products uses in-house AT-cut crystal expertise for higher performance and accuracy.Read More
IRIDIUM BAND FILTER
January 17, 2018
Iridium satellite communication system uses 1616-1626.5 MHz band to uplink with orbiting communication satellites. GPS satellites broadcast at 1227.60 MHz (L2), 1575.42(L1) MHz and Galileo satellites broadcast at 1575.42(L1) MHz. Proximity of the Iridium frequency communication band with the L1 frequencies of the GPS, Galileo systems can cause crosstalk with Global Navigation Satellite System (GNSS) receivers. Cross talk between Iridium transmissions and other GPS signal can cause cycle slips and loss of lock on the carrier and code phases, thereby degrading the quality observations.Read More
Senior Design Engineer Michael Adkins
October 02, 2017
MtronPTI Announces Addition of Senior Design Engineer Michael Adkins
Design Capabilities Strengthened for Cavity and Waveguide Microwave Filters and Switched Filter Banks
MtronPTI announces M1380 and M1381 Series
September 05, 2017
High Shock Resistance Through Hole Crystal
Suitable for applications that require a wide temperature range (-55 to 125°C) and high shock (5000 g) environment.
Product is in a hermetically sealed miniature ceramic through hole package and can be processed with wave or re-flow soldering.
Key Features:Read More
GPS L1 and L2 Band Ceramic Filters
March 22, 2017
MtronPTI’s L1 and L2 band ceramic filters are designed for use on L1 and L2 GPS receivers. When placed in-line between the GPS receiver and the antenna, these filters provide a minimum of 27 dB attenuation outside of the GPS band. This an effective way to reduce interference from other communication devices that interfere with the GPS signal in your application.
Our filters are targeted towards industrial and commercial applications involving L1 and L2 GPS bands. Filters are manufactured using High-Q Ceramic Resonators to achieve low insertion loss.Read More
March 03, 2017
Gull-wing lead attach for 5x7mm CMOS OscillatorsRead More